Fluted and Reeded Shower Glass

Wholesale Fluted and Reeded Shower Glass

  • Fluted and reeded patterned glass for shower doors, screens and enclosures
  • Tempered (toughened) to EN 12150, ANSI Z97.1 or AS/NZS 2208
  • Cut to size with polished edges, holes and notches
  • Minimum order 50 pieces; trial and less than container load orders accepted
  • Lead time 3 to 4 weeks
  • OEM/ODM is available

Share:

Fluted shower glass, also called reeded glass or ribbed glass, is patterned glass with parallel grooves rolled into one face. The grooves blur the view through the glass while still letting light pass, so it gives privacy without making a bathroom dark. MIGO Glass manufactures fluted and reeded shower glass cut to size and tempered (toughened) for shower enclosure brands, distributors, glass fabricators and building projects.

Fluted shower glass panels with polished edges
Fluted shower glass panels with polished edges
Tempered fluted glass stacked with cork pads before packing
Tempered fluted glass stacked with cork pads before packing
Hole and notch processing on fluted shower glass
Hole and notch processing on fluted shower glass

Fluted and Reeded Shower Glass Specifications

Glass typeFluted / reeded patterned glass, one face fluted and one face smooth
Flute pattern and widthConfirmed with the quotation; send a photo, drawing or sample reference of the pattern you need
ThicknessConfirmed with the quotation
SizeCut to size to your drawings, from 300 x 300 mm; maximum size confirmed with the quotation
Flute directionVertical or horizontal, as marked on your drawings
ProcessingCutting to size, edge polishing, hole drilling, notches and cut-outs, tempering
Safety standardsTempered (toughened) to EN 12150, ANSI Z97.1 or AS/NZS 2208 according to the destination market
Size toleranceWithin 1 mm
Hole diameter toleranceWithin 0.5 mm

Need the full factory specification for an OEM range? See OEM specifications, MOQ and lead time.

How to Specify Fluted Glass for Shower Doors and Screens

  • Flute direction. Mark on the drawing whether the flutes run vertically or horizontally. Vertical flutes are the usual choice for shower doors and fixed screens.
  • Smooth side. One face is smooth and one is fluted. State which face goes towards the shower; the smooth face is usually placed inside because it is easier to wipe clean.
  • Pattern match. For a door and a fixed panel that sit side by side, order them together so the flutes line up across both panels.
  • Hardware positions. Give hole and notch positions for hinges, handles and clamps on the drawing. Holes and notches are processed before tempering and cannot be added afterwards.
Polished edge on a fluted glass shower screen
Polished edge on a fluted glass shower screen
Fluted glass patterns with different flute widths
Fluted glass patterns with different flute widths

Where Fluted Shower Glass Is Used

Fluted Shower Glass: Supply Details

SupplyManufacturer supply, cut to size and processed to your drawings
Minimum order50 pieces; trial orders and less than container load orders accepted
Lead time3 to 4 weeks
SamplesAbout 2 weeks
PackingCartons with foam protection, printable for private label; or wooden crates with cork pads and corner protectors
Trade termsFOB, CIF or DDP
QuotationWithin 24 hours of receiving sizes and quantity

Matching shower glass hardware such as hinges, handles, clamps and seals is supplied with the glass. Send your sizes and quantity for a quote.

FAQ: Fluted and Reeded Shower Glass

What is fluted shower glass?

Fluted shower glass is patterned glass with parallel grooves rolled into one face. It blurs the view through the glass while letting light through, and it is cut to size and tempered (toughened) for shower doors, screens and enclosures.

What is the difference between fluted glass and reeded glass?

In the shower glass trade the two names are used for the same type of glass: glass with parallel ribs on one face. Some suppliers use reeded for narrower ribs and fluted for wider ones, so it is safest to confirm the pattern with a photo or a sample.

What is Moru glass?

Moru glass is a ribbed patterned glass with fine, closely spaced vertical lines. Buyers looking for Moru glass are usually looking for a narrow fluted pattern; send a reference photo to confirm availability.

Can fluted glass be tempered for shower doors?

Yes. Fluted glass is cut, edged, drilled and notched first and then tempered (toughened) into safety glass. MIGO Glass tempers shower glass to EN 12150, ANSI Z97.1 or AS/NZS 2208 according to the destination market.

Does fluted shower glass give privacy?

Yes. The flutes distort shapes behind the glass, so it gives more privacy than clear glass while still letting light through. It is not fully opaque; for full privacy, acid frosted glass is used.

What is the minimum order for fluted shower glass?

The minimum order is 50 pieces. Trial orders and less than container load orders are accepted, and production lead time is 3 to 4 weeks.

Related guides: how to choose reeded shower glass and what is Moru glass.

About MIGO Glass

MIGO Glass (Qingdao Migo Glass Co., Ltd) has manufactured glass since 2008. Tempered (toughened) shower glass is made to your size list in 3 to 19 mm, CE-marked to EN 12150-2, with a minimum order of 50 pieces and an average lead time of 3 to 4 weeks. Matching shower glass hardware is supplied in the same shipment.

See OEM specifications, MOQ and lead time for brands and importers, or project supply for building projects. Send us your glass list for a quotation within 24 hours.

Related Products

Get Instant Quote

Contact Form MIGO