OEM Shower Glass Manufacturer for Shower Enclosure Brands
MIGO Glass (Qingdao Migo Glass Co., Ltd) manufactures tempered (toughened) shower glass to your size list and drawings. This page gives the facts a buyer needs before sending an enquiry: sizes, tolerances, certificates, minimum order, lead time, packing and terms.
In short: glass from 3 mm to 19 mm, dimensional tolerance within 1 mm, CE-marked to EN 12150-2, minimum order 50 pieces, average lead time 3 to 4 weeks, quotation within 24 hours of receiving your list.
Shower Glass Specifications
| Glass thickness (flat tempered, single pane) | 3, 4, 5, 6, 8, 10, 12, 15 and 19 mm. Shower doors and enclosures most often use 6, 8, 10 or 12 mm. |
|---|---|
| Flat tempered size | Minimum 300 x 300 mm; maximum 2400 x 18000 mm |
| Bent tempered size | Minimum 300 x 300 mm; maximum 3660 x 18000 mm |
| Dimensional tolerance | Within 1 mm |
| Hole and notch position tolerance | Within 1 mm |
| Hole diameter tolerance | Within 0.5 mm |
| Diagonal tolerance | Within 2 mm |
| Glass types | Clear, low iron, frosted, patterned and tinted shower glass |
| Processing | Cutting, edging, drilling, notches and cut-outs to your drawings. See fabrication. |
Certificates and Standards
| CE | Certificate of Conformity No. SC-PSC-4-2026-07-41 for tempered glass to EN 12150-2:2004, valid to 16 July 2031 |
|---|---|
| ISO 9001:2015 | Quality management certificate No. 174Q240557R0S, valid to 2 December 2027 |
| SGCC | Certified; certificate details are provided on request |
| Standards we produce to | EN 12150, ANSI Z97.1 and AS/NZS 2208 |
Minimum Order, Lead Time and Container Load
| Minimum order | 50 pieces. Trial orders and less-than-container shipments are accepted. |
|---|---|
| Production lead time | 3 to 4 weeks on average, confirmed for each order according to the processing required |
| Samples | About 2 weeks |
| Load per 20 ft container | About 1,400 m2 of 8 mm glass, 1,100 m2 of 10 mm glass or 860 m2 of 12 mm glass |
| Quotation | Within 24 hours of receiving your detailed list |
Factory and Capacity
| Established | 2008 |
|---|---|
| Factory area | 30,000+ m2 |
| Team | 150 employees, including 79 technical staff and 13 quality inspectors |
| Equipment | 5 cutting lines, 6 edging lines, 4 tempering furnaces and 2 laminating lines |
| Annual capacity | 3 million m2 |
Quality Control
- Every tempering batch is checked for thickness, size, diagonal, surface defects, holes and notches, and bow.
- Two pieces from each batch are broken for a fragmentation test.
- Heat soak testing is carried out when the customer requires it.
- An inspection report is issued before shipment.
Packing
- Carton packing: each piece or set in its own carton, with foam board or EPE foam around the glass. Cartons can be printed with your company details and logo.
- Wooden crate packing: cork pads or anti-mould paper between the panes, with corner protectors, as required.
Samples, Payment and After-Sales
| Samples | Plain glass samples without holes or notches are free; the customer pays the freight. Samples with specific processing are charged, plus freight. |
|---|---|
| Payment | T/T: 30% deposit, 70% balance against the copy of the bill of lading |
| Trade terms | FOB, CIF and DDP |
| Breakage on arrival | Send clear photos and video. We arrange replacement glass, normally shipped with your next order. |
Matching Hardware in the Same Shipment
Shower enclosure brands often need the hardware with the glass. MIGO Glass supplies matching shower glass hardware – hinges, handles, clamps, U channel, rails and seals – sourced to fit the glass and loaded in the same container.
How to Order
Send us the glass type, thickness, sizes, quantities, processing requirements and packing requirements. Drawings with hole positions are best. We reply with a detailed quotation within 24 hours.
Send your glass list, email info@migoglass.com, or WhatsApp +86 185 6268 2380. Supplying a building project instead? See project supply.
OEM Shower Glass FAQ
What thicknesses are available for shower glass?
Shower doors and enclosures most often use 6, 8, 10 or 12 mm tempered glass. MIGO Glass produces flat tempered glass in 3, 4, 5, 6, 8, 10, 12, 15 and 19 mm.
What types of glass can you provide for shower enclosures?
Clear, low iron (ultra-clear), frosted, tinted and patterned tempered glass for shower enclosures and bathroom partitions.
Can you provide customised glass sizes and shapes?
Yes. Glass is cut, drilled, edged and polished to your drawings and specifications.
What is the difference between tempered glass and laminated glass for bathrooms?
Tempered glass has high strength and breaks into small blunt fragments. Laminated glass holds broken fragments together with an interlayer. The suitable option depends on your design and safety requirements.
Can you provide frosted or privacy glass for bathrooms?
Yes. Acid-etched glass, sandblasted glass and patterned glass give privacy while letting light through.
Can you make holes and cut-outs for shower door hardware?
Yes. Holes, notches and cut-outs are made to your technical drawings. All cutting and drilling is completed before tempering.
Can you provide glass with an easy-clean coating?
Yes. An optional easy-clean coating helps reduce water stains, soap residue and dirt build-up, making daily cleaning easier.
What certifications does your shower glass have?
MIGO Glass holds a CE certificate of conformity for tempered glass to EN 12150-2, ISO 9001:2015 quality management certification and SGCC certification. Glass is also produced to ANSI Z97.1 and AS/NZS 2208.
How do you ensure product quality?
Each tempering batch is checked for thickness, size, diagonal, surface defects, holes and notches, and bow. Two pieces per batch are broken for a fragmentation test, and an inspection report is issued before shipment.
What is your minimum order quantity?
The minimum order is 50 pieces. Trial orders and less-than-container shipments are accepted.
What is your production lead time?
The average lead time is 3 to 4 weeks and samples take about 2 weeks. The schedule is confirmed for each order according to the processing required.
Can you provide samples before bulk production?
Yes. Plain glass samples without holes or notches are free, with freight paid by the customer. Samples with specific processing are charged, plus freight.
How do you pack shower glass for international shipping?
Either in individual cartons with foam board or EPE foam around the glass, or in wooden crates with cork pads or anti-mould paper between the panes and corner protectors.
Can you supply glass for large bathroom projects?
Yes. MIGO Glass supplies shower enclosure manufacturers, bathroom brands, wholesalers and construction projects, producing to approved drawings and delivery schedules.
What information do you need for a quotation?
Glass type and colour, thickness, length and width, edge processing, hole and cut-out drawings, quantity and destination port. A detailed quotation is sent within 24 hours.